I watched Star Wars for the first time when I was in college. I had seen bits and pieces before, but college was the first time I got to watch all 3 movies, together, in all their gloriousness. My biggest take-away at the time was…. the biggest crush ever on Han Solo. sigh. (a moment while I sit here and reminisce)
And this is what proves the genius of Lucas… He took a strong heroine, a smuggler, a love-romance story, and dressed it up as space cowboy story…. All these years, all the guy-geeks out there think it is the best Sci-Fi movie of all time. But really, as us girls know, it actually one of the greatest chick-flicks ever made…
Here is: #17 in the Perler bead/cross-stitch/Lego/pixel/mosaic series.
- Perler Beads
- Tweezers (optional)
- Perler Clear Pegboards
- Removable Tape
- Printout of Pattern (download above image)
- Baking Parchment Paper (Perler Ironing Paper)
- Heavy Object with Flat Bottom
- Cork sheets with Adhesive Backs
- Scissors or X-acto Knife
- Bantha Milk (optional)
- Robot Chicken: Star Wars 1-3
- Download and print out the pattern provided (mirror it, if you only plan on ironing on only 1 side).
- Cut out, then tape pattern to the back of the Perler Pegboard so the dots line up with the pegs.
- Add the Perler beads (tweezers are pretty handy if you don’t have a 6 yr old’s tiny fingers).
- Carefully move pegboard to ironing board, place parchment (or Perler ironing paper) on top.
- Iron until the beads start melting together (If you have never done this before, it might take some practice to get it “just right”).
- Let cool for a bit, remove from Perler Pegboard and remove paper.
- Optional: turn over, cover with parchment paper and iron on other side. (put something solid and heatproof underneath to make ironing easier)
- If you only iron on 1 side, place it under something flat and heavy while it cools, to avoid curving.
- Cut cork about 1/4” smaller than the square, affix to the back.
- Don’t forget the Bantha milk. Enjoy!
Usually people iron on both sides of the Perler bead design, but I prefer to only do the back. The designs look crisper and more “pixely”. With the cork on the back, I have not had any problems with the coasters falling apart, but feel free to iron yours on both sides.
Note, if you only plan on iron on only 1 side, you need to mirror the pattern.
Also, the coasters are pretty hard to clean, so try not to get anything too gunky in there.
Perler Beads – Black
Perler Beads – White
Perler Beads – Parrot Green
Perler Beads – Pastel Blue
Perler Beads – Sand
Perler Beads – Butterscotch
Perler Beads – Tan
Perler Beads – Light Brown
Perler Beads – Red
Feel free to use these patterns for any personal use – but please do not sell items made with them. Also, feel free to link to this blog so others can download the pattern, but do not download and then re-upload in order to offer them as downloads on your own site/blog. THANKS!