Anakin was only 9 when he won the Boonta Eve Classic. Plucky, smart, precocious, and already VERY confident. He is the only character we get to watch grow up on screen in the series, and doing so (knowing how his fate), is the single best part of the Prequel trilogy. Especially watching the movies again, while seeing my own kids growing up, Anakin’s arc takes on a very different emotion – bitter-sweet and terrifying all at once.
I have been working on the post for how we made the Anakin at the Podrace Halloween costume, so we have been looking at lots of pictures from a few years ago. Kids grow up fast, and it is impossible not to get nostalgic.
I’ll have that post up soon, in the meantime, here is #10 in the Perler bead/cross-stitch/Lego/pixel/mosaic series.
- Perler Beads (Black, Red, Sand, Butterscotch, Dark Blue, Light Grey, Dark Grey, Rust)
- Tweezers (optional)
- Perler Clear Pegboards
- Removable Tape
- Printout of Pattern (download above image)
- Baking Parchment Paper (Perler Ironing Paper)
- Heavy Object with Flat Bottom
- Cork sheets with Adhesive Backs
- Scissors or X-acto Knife
- Bantha Milk (optional)
- Download and print out the pattern provided (mirror it, if you only plan on ironing on only 1 side).
- Cut out, then tape pattern to the back of the Perler Pegboard so the dots line up with the pegs.
- Add the Perler beads (tweezers are pretty handy if you don’t have a 6 yr old’s tiny fingers).
- Carefully move pegboard to ironing board, place parchment (or Perler ironing paper) on top.
- Iron until the beads start melting together (If you have never done this before, it might take some practice to get it “just right”).
- Let cool for a bit, remove from Perler Pegboard and remove paper.
- Optional: turn over, cover with parchment paper and iron on other side. (put something solid and heatproof underneath to make ironing easier)
- If you only iron on 1 side, place it under something flat and heavy while it cools, to avoid curving.
- Cut cork about 1/4” smaller than the square, affix to the back.
- Don’t forget the Bantha milk. Enjoy!
Usually people iron on both sides of the Perler bead design, but I prefer to only do the back. The designs look crisper and more “pixely”. With the cork on the back, I have not had any problems with the coasters falling apart, but feel free to iron yours on both sides.
Note, if you only plan on iron on only 1 side, you need to mirror the pattern.
Also, the coasters are pretty hard to clean, so try not to get anything too gunky in there.
Feel free to use these patterns for any personal use – but please do not sell items made with them. Also, feel free to link to this blog so others can download the pattern, but do not download and then re-upload in order to offer them as downloads on your own site/blog. THANKS!