HAPPY MAY THE FOURTH EVERYONE!!

I need to start by apologizing for the lack of posts the past few months.  Things got busy, and time got away.  But we are still here!  I PROMISE!  To prove it, we are celebrating our favorite “holiday” by sharing another of our exclusive “May the Fourth be with You Party Character Patterns.”

In the next few weeks we are planning to try to get back to a more regular posting schedule, so we hope that you guys keep coming back!

For you guys who have not seen our other designs, scroll down to take a look at a few, and find links to all of them!

As always, we ask you not to make and sell these.  A, because LucasFilm Ltd. and Disney owns the rights to all characters, and B, because we made the designs and it would be unfair for you to make money off them.  We also we want to remind you that we should get credit when the patterns are used.  So, if you show your work using our designs anywhere (online as well), put a “Pattern © Anette Nam Design” and link to “Maythefourthbewithyouparty.com” somewhere close by. THANK YOU!

Lastly here are links to all our Star Wars character stencil/Silhouette Cameo free downloadable patterns:
Party Yoda Pattern
Party C-3PO Pattern
Party Darth Maul Pattern (not pictured above)
Party AT-AT Pattern
Party Stormtrooper Pattern
Party R2-D2 Pattern (barely visible above)
Party BB-8 Pattern (not pictured above)
Party Kylo Ren Pattern (not pictured above)

We also have a Christmas versions of these patterns:
Christmas Yoda Pattern
Christmas C-3PO Pattern
Christmas Darth Maul Pattern
Christmas AT-AT Pattern
Christmas R2-D2 Pattern
Christmas Stormtrooper Pattern

Needed:

• Black T-shirt
• Silhouette Cameo Cutting Machine (or X-acto Knife if you are doing it by hand)
• Silhouette Cameo Smooth Heat Transfer (White, Lime Green, Blue, Orange & Grey)
• K-2SO May the Fourth be with you party Tshirt pattern (download pdf here)
• Iron
• Thin Cotton Fabric (such as sheet or pillowcase)
• X-acto Knife

How To:

1. Down-load the pattern below.
2. Load and convert the pdf to a dxf file, and reverse the image.
3. Cut out on Cameo.  (There are lots and lots of great You Tube tutorials on how to use your Cameo to cut out vinyl, so I will not get into how to use the machine here.)  OR print out on printer, place on vinyl and cut through both paper and vinyl layers by hand (NOT the clear plastic layer).
4. Weed the vinyl sheet (get rid of all the unwanted little pieces). I find an X-acto knife is best for this.
5. Close cut the shapes, so there is just a little bit of the sticky clear plastic around each piece.
6. Lay them out (sticky side down) on the T-shirt, cover with cotton fabric, and iron for about a minute (on cotton setting, with no steam).
7. Carefully peel the clear plastic off.
8. Let cool for a while.

Supplies:

• K-2SO May the Fourth be with you party Tshirt pattern (download pdf here)
• Silhouette Cameo Cutting Machine
• Silhouette Cameo Smooth Heat Transfer
• Black T-shirt